Modeling of the degradation kinetics of biodegradable scaffolds: The effects of the environmental conditions

The rate of hydrolytic degradation of tissue‐engineered scaffolds made from bioresorbable polyesters is dependent on several factors. Some are related to the properties of the degrading polymeric material, but others are related to the geometry of the porous structure and the operating environment. It is well known that the rate of hydrolytic degradation of a given object, porous or nonporous, is lower when it is exposed to dynamic conditions, a flowing medium, than when it operates in static conditions. The most likely reason is the more efficient removal of the acidic degradation products from the vicinity of the polymeric material when it is operating in a flowing medium. In this article, we present a new phenomenological reaction–diffusion model of aliphatic polymer degradation. The model can be used to predict the significance of various factors in in vitro degradation tests, with particular reference to the flow of the degradation medium, and the frequency of medium replacement in the case of static conditions. The developed model was used to simulate the degradation of poly(dl ‐lactide‐co‐glycolide) scaffolds with different porosities subjected to static and dynamic testing conditions. The results confirm that the porosity of the scaffold had a significant influence on the degradation rate. It was shown that the combination of dynamic conditions and high porosity effectively reduced the mass loss and molecular weight loss of the degrading polymer. However, the effect of changes in the velocity of the flowing medium had a negligible effect on the rate of degradation. © 2014 Wiley Periodicals, Inc. J. Appl. Polym. Sci. 2014 , 131, 40280.     

Two-stage method of obtaining high bulk density sodium tripolyphosphate: Design and mechanism of process

The paper presents a two-step method for obtaining sodium tripolyphosphate (STPP) with a bulk density of about 0.90 kg/dm³ after the first step, using sodium phosphates after spray drying and water as the raw materials. STPP with a bulk density of 0.95–1.00 kg/dm³ was generated in the second stage, using STPP from the first step and water as the raw materials. The paper presents statistical analyses to define the process parameters which significantly affect sodium tripolyphosphate bulk density. The determination of the profile approximation and utility function enabled the optimization of process parameters for obtaining a product with a bulk density of 0.95–1.00 kg/dm³. Mechanisms of increasing bulk density was indicated by studies on the microstructure of the product and phase transformation during the process. The data were empirically verified and satisfactory results were found.     

Effective elastic properties and residual stresses in directionally solidified eutectic Al<Subscript>2</Subscript>O<Subscript>3</Subscript>/YAG/ZrO<Subscript>2</Subscript> ceramics estimated by finite element analysis

Effective elastic properties and residual stresses were assessed in directionally solidified ternary eutectic ceramic, Al₂O₃/YAG/ZrO₂, by finite element analyses. A 3D finite element model was generated from a CT scan, representative of the microstructure and with a similar volume fraction. Effective elastic properties were calculated by numerical homogenisation. They highlight a quasi-isotropic behaviour of the ternary eutectic ceramics. Despite the difficulties to measure the strain, the dispersion observed in the results and the limited reliability of the materials properties, the results constitute a step towards a better understanding of the material behaviour. Thermal residual stresses induced by the manufacturing were also evaluated. Tensile residual stresses in yttria-stabilised zirconia and compressive residual stresses in YAG and alumina were highlighted. This evaluation also shed light on the influence of the phase morphology in the microstructure. Indeed, the computed spatial distribution of the residual stresses showed that they are different from one position to another due to the variation in phase morphology and also to material properties variability. Therefore, it is important when numerically assessing the thermomechanical properties to take into account the microstructure morphology as well as the variability of material properties.     

The Numerical Comparison of Heat Transfer in a Coated and Fixed Bed of an Adsorption Chiller

Ecological adsorption technology is becoming a focus of attention by industry due to the utilization of low grade thermal energy sources for cooling production. It can be a promising part of sustainable development concept of the global economy. Therefore, research aiming at improving their performance i.e. Coefficient of Performance (COP) by optimizing the construction of sorption beds with a built in heat exchanger system is crucial. The heat transfer characteristics between the bed of porous media (sorbent) and surface of the heat exchanger system determine the heating power of an adsorption chiller. The HP increase can be obtained by heat transfer intensification due to the increase in the thermal conductivity of the sorbent layer in the vicinity of the heat exchanger’s surface. The novel modification of the sorbent layer structure is proposed in the paper in order to improve the heat transfer processes in the heat exchanger boundary layer. The analysis of desorption process conditions in the parametric model of a coated and fixed adsorption bed design is presented in the paper. The computational fluid dynamics (CFD) with conjugate heat transfer analysis is used to determine the crucial input parameters (temperature distribution in the sorbent bed) for further analytical calculations. The commercial code Ansys Fluent was used to perform numerical simulations. The developed computational model consisted of three subdomains representing heating water, heat exchanger material (copper) and sorbent (silica gel). The comparison of a novel coated design and a conventional fixed bed is discussed in the paper. The numerical analysis is based on experimental thermal conductivity measurements of the sorbent layer in different configurations, which were performed using Laser Flash Method.     

The role of niobium in MCM-41 supported with Pt and Au—A comparative study of physicochemical and catalytic properties

This paper reviews a series of results, partly published recently, on niobosilicate mesoporous molecular sieves of MCM-41 type modified with noble metals (Pt, Au). Platinum is introduced to MCM-41 by impregnation technique, whereas gold is incorporated by two methods: during the synthesis by co-precipitation (COP) and by impregnation (IMP). Three fundamental features of the prepared materials have been considered: (i) texture/structure, (ii) noble metal state and dispersion, and (iii) catalytic activity. The latter has been tested in selective reduction of NO by propene, methanol oxidation and WGS process. The role of niobium, as well as the effect of the nature of noble metals and the preparation method on the physicochemical and catalytic properties of the final materials based on NbMCM-41 (in comparison with siliceous MCM-41) is demonstrated.     

On Stochastic Modeling of Interface Defects in Composite Materials

The article presents mathematical and computational research dealing with the problem of stochastic interface defects occurring in composite materials between their constituents. A mathematical model of the periodic composite with such defects is presented in detail, as well as probabilistic numerical methods enabling computational experiments which are shown in a further part of the text. The fiber-reinforced and laminated composite has been tested in numerical tests as well as the superconducting coil cable-four-component composite to verify how the structural defects considered, according to the model introduced, influence the static behavior of the composites analyzed. All the results obtained and discussed in the article are summarized in concluding remarks which show the directions of further model development, while numerous references enable the reader to study the problem further.     

Antimicrobial Activity of a Pullulan–Caraway Essential Oil Coating on Reduction of Food Microorganisms and Quality in Fresh Baby Carrot

This research evaluated the antimicrobial efficacy of pullulan films containing caraway essential oil (CEO). The films were prepared from a 10% of pullulan, containing from 0.12% to 10.0% of CEO. The composition of the CEO was analyzed with the use of gas chromatography. The antimicrobial activity of the CEO was evaluated with the method of serial microdilutions, and the films containing CEO—with the agar diffusion method against selected Gram‐negative, Gram‐positive bacteria, and fungi. The structure of the film surface and its cross‐section were analyzed using a scanning electron microscope (SEM). Analyses were also carried out to determine the efficacy of a pullulan coating with 10% CEO on baby carrots experimentally inoculated with Salmonella enteritidis, Staphylococcus aureus, Saccharomyces cerevisiae, or Aspergillus niger and stored at a room temperature for 7 d. At a concentration of 0.12%, CEO inhibited the growth of all the tested microorganisms. Pullulan films containing 8% to 10% of CEO were active against all tested microorganisms. Populations of S. aureus on carrot samples were reduced by approximately 3 log CFU/g, while those of A. niger and S. cerevisiae by, respectively, 5 and 4 log CFU/g, after 7 d of storage. S. enteritidis was the most resistant among the tested species, since it was not significantly reduced after 7 d of storage. At the end of storage, samples treated with pullulan–caraway oil coating maintained better visual acceptability than control samples. Results of this study suggest the feasibility of applying a pullulan film with incorporated CEO to extend the microbiological stability of minimally processed foods.     

Identification of Mg<Subscript>2</Subscript>Cu particles in Cu-alloyed austempered ductile iron

In the present work, the Mg₂Cu precipitates in copper-alloyed austempered ductile iron (ADI) were identified by analyzing techniques such as TEM and SEM with EDS. It was revealed that, in castings made of ADI-containing copper, highly dispersed particles of Mg₂Cu are formed, whose size does not exceed <1 μm. The research work was carried out on ductile iron that was austenitized at 900 °C, followed by austempering at 380 °C. The microstructure was investigated using various techniques, including optical microscopy, XRD, SEM, and TEM. In addition to this, the exhibited impact properties of castings with Cu, Ni, and Cu+Ni were also determined. This study casts a new light on the formation of the structure of Cu-alloyed ADI. The highly-dispersive and brittle Mg₂Cu particles that are located in the vicinity of the graphite nodules have a negative effect on the impact properties of ADI. It has also been shown that impact strength decreases from levels of 160-180 J (for copper-free ADI) to 90-120 J (for copper-and copper-nickel-alloyed ADI).     

Block cipher based on reversible cellular automata

We propose a new encryption algorithm relying on reversible cellular automata (CA). The behavior complexity of CA and their parallel nature makes them interesting candidates for cryptography. The proposed algorithm belongs to the class of symmetric key systems. Marcin Seredynski: He is a Ph.D. student at University of Luxembourg and Polish Academy of Sciences. He received his M.S. in 2004 from Faculty of Electronics and Information Technology in Warsaw University of Technology. His research interests include cryptography, cellular automata, nature inspired algorithms and network security. Currently he is working on intrusion detection algorithms for ad-hoc networks. Pascal Bouvry, Ph.D.: He earned his undergraduate degree in Economical & Social Sciences and his Master degree in Computer Science with distinction (’91) from the University of Namur, Belgium. He went on to obtain his Ph.D. degree (’94) in Computer Science with great distinction at the University of Grenoble (INPG), France. His research at the IMAG laboratory focussed on Mapping and scheduling task graphs onto Distributed Memory Parallel Computers. Next, he performed post-doctoral researches on coordination languages and multi-agent evolutionary computing at CWI in Amsterdam. He gained industrial experience as manager of the technology consultant team for FICS in the banking sector (Brussels, Belgium). Next, he worked as CEO and CTO of SDC (Ho Chi Minh city, Vietnam) in the telecom, semi-conductor and space industry. After that, He moved to Montreal Canada as VP Production of Lat45 and Development Director for MetaSolv Software in the telecom industry. He is currently serving as Professor in the group of Computer Science and Communications (CSC) of the Faculty of Sciences, Technology and Communications of Luxembourg University and he is heading the Intelligent & Adaptive Systems lab. His current research interests include: ad-hoc networks & grid-computing, evolutionary algorithms and multi-agent systems.     

Rigorous Numerical Approach to Isolation in Dynamical Systems on the Example of the Kuramoto-Sivashinsky Equation

This paper describes a method of rigorous verification of an isolating neighborhood based on computer assisted computations. As an application we study the Kuramoto-Sivashinsky equation. The result of the computer assisted proof was directly used in [9] to prove the existence of heteroclinic solutions of the Kuramoto-Sivashinsky equation.